Locking Gas Spring
A locking gas spring incorporates a mechanism to enable the rod to be locked at any point in its travel. This mechanism is actuated by a plunger that protrudes from the rod. When this plunger is depressed the rod is free to operate as normal. When the plunger is released, which may be at any point in the stroke, the rod is locked in that position. Shuangyuan offers three types of locking gas springs, which have the following characteristics when locked:
Flexible Good resistance to rod being pushed of pulled
Rigid in tension Rigid when rod is being pulled, high resistance to rod being pushed
Rigid in compression High resistance to rod being pulled, rigid when rod is being pushed
All three types of locking springs have the same locking mechanism. This locking mechanism operates when the plunger rod is depressed by opening a valve in the piston. When the plunger rod is released the valve closes and the passage of oil or gas is prevented, locking the piston in that position.
Release valve: Both flexible and rigid in tension gas springs can be supplied with a release valve, which allows the installer to reduce the force. This release valve also allows SY to easily and economically recharge the gas spring should too much gas be released.
Locking Gas Springs(Air Springs) Products IntroductionSTOP and LOCKING can be set at an arbitary postion by opening and locking the internal oil(gas).
1. Easy operation
Operation is easy since opening and locking can be done by pressing the valve pin.
2. Smooth operation
The movement is smooth because of an oil buffering function,and the low elasticity index providers pleasant feeling.
3. Compact
It is easy to install as it is light in weight due to its reduced length and compact external mirror.
4. Simple installation:
It is simple to install due to its convenient confiuration.
Application of Locking Gas Springs:
Office chair,Bus or Train chair,Hospital BED etc.
A Principle of operation:It is possible to stop at any position and be locked by move of inner oil (gas) In case of having Free Piston
1. LockingO/C/Pin shuts off oil+Gas and Piston is locked 2.Unlocking
When Valve Pin(Push Road)is pushed,Oil+Gas can move throgh Onifice pipe by opened O/C/Pin and Locd is released.Piston Rod is expanded by pressure of Gas but it is reduced by pushing force. 3.Relocking
When force is removed from Valve Pin(Push Road),O/C/Pin is locked and a state of (1) comes agian.
| Manufacturing specs: | |||||
| Type | Cylinder(￠) | Piston Rod(￠) | Stroke(mm) | Extender Length | F1(N) |
| Lock | 22 | 10 | 12-250 | 150-650 | 150N-1000N |
| 28 | 10 | 12-250 | 150-650 | 150N-1000N | |
| 28 | 10 | 12-250 | 150-650 | 200N-1200N | |
Locking Gas Spring Specification
*Infinite adjustment of positions
*Rigid(positive) or Elastic(cushioned )locking
*Counter balances forces
| Elastic Locking Gas Spring | |||
| MODEL# | S(stroke) (mm) | L(extended length) (mm) | F1 (N) |
| SY-10/28-60-228 | 60 | 228 | 200-1200 |
| SY-10/28-80-269 | 80 | 269 | 200-1200 |
| SY-10/28-100-310 | 100 | 310 | 200-1200 |
| SY-10/28-120-348 | 120 | 348 | 200-1200 |
| SY-10/28-160-430 | 160 | 430 | 200-1200 |
| SY-10/28-200-509 | 200 | 509 | 200-1200 |
| SY-10/28-250-610 | 250 | 610 | 200-1200 |
Note: We have 200N,250N,300N,350N,400N,500N,600N,800N,1000N,1200N available Rod diameter:10mm,Cylinder diameter:28mm |
|||
| Rigid Locking Gas Spring | |||
| MODEL# | S(stroke) (mm) | L(extended length) (mm) | F1 (N) |
| SY-10/28-60-265 | 60 | 265 | 200-1000 |
| SY-10/28-80-310 | 80 | 310 | 200-1000 |
| SY-10/28-100-370 | 100 | 370 | 200-1000 |
| SY-10/28-120-420 | 120 | 420 | 200-1000 |
| SY-10/28-160-510 | 160 | 510 | 200-1000 |
| SY-10/28-200-600 | 200 | 600 | 200-1000 |
| SY-10/28-250-730 | 250 | 730 | 200-800 |
Note: We have 200N,250N,300N,350N,400N,500N,600N,800N,1000N available Rod diameter:10mm,Cylinder diameter:28mm |
|||
Note:above sizes are standard sizes,we can also customize the gas spring as per your Request. |
|||